⬇⬇GUMMIES FOR EVERYONE ON SALE NOW ⬇⬇

CBD Capsules

 

1 Cup of CBD or Flower bud/trim (FYI-1 cup is approx 20 grams)

To decarboxylate:
-Preheat oven to 240 degrees F
-Spread bud/trim on a cookie sheet
-Cover with foil
-Bake for 1 hour

If you are adding dry bud to your capsules, add the bud to your food processor.
Pulse until bud is fine. (Almost a powder)

To Infuse:
Decarb 1/2 ounce of flower or CBD bud
In a double boiler or crock pot add 1 Cup of your choice of Coconut oil, Cocoa butter, or MCT oil. (or butter/oil of your choice).
Add decarbed bud
Simmer for 4-12 hours.
Pour mixture into a bowl through a coffee filter or some cheese cloth to collect the loose bud.


TO FILL CAPSULES WITH DRY BUD: *FYI the "bodies" are the longer portion of the capsule, the "caps" are shorter.*

-Take 100 capsules out of the bag and separate the caps and bodies into 2 separate bowls or containers.
-Place the alignment plate on top of the body plate. (The body plate is the spring loaded plate)
-Pour the 100 body portions of the capsule into the alignment plate.
-Carefully shake the plate to place the capsule bodies into place. (Place your hand over the side opening to prevents spills)
-Remove the alignment plate and add any loose bodies into any open holes and flip any bodies that are upside down. You can remove the alignment plate and press on the bottom tray to reveal any that are upside down.
***You want the bodies to be in the tray holes with the opening facing up***
-With the alignment plate removed, place the spill guard on top of the body plate.
-Add half of your bud to the plate and use the scraper to push the dry bud into the capsules. Add more bud as needed to fill them.
-Use the tamping plate to push the bud into the capsules. (plate with the spikes)
-Refill the tray with remaining bud and spread into the capsules with the scraper.
-Scrape excess bud out of the tray through the side opening.
-remove the spill guard and place the alignment plate on top of the cap tray.
-Pour the caps into the alignment tray and shake it gently to add all the caps to the holes.
-Remove the alignment tray to add any caps and to flip any caps that are upside down.
***Use your pipette or a toothpick to pop out the upside down caps as this tray is not spring loaded***
***Caps should be in the holes with the opening facing up***
-Place the merge plate on top of the cap tray with the side notches facing up.
-Carefully pick up both trays and flip them upside down so that the merge plate is under the cap tray.
-Place both trays on top of the body plate.
-Using firm pressure, press down on the top plate. You will feel the bodies and the caps clicking together. Firmly press everywhere on the top plate to make sure all the capsules are connected.
-Remove the cap tray.
-Pick up the merge plate. This should house all of your connected capsules.
-Pour capsules onto a tray or plate.
Capsules are now ready to be stored in a container of your choice.

TO FILL CAPSULES WITH BUTTER/OIL: *FYI the "bodies" are the longer portion of the capsule, the "caps" are shorter.*

-Take 100 capsules out of the bag and separate the caps and bodies into 2 separate bowls or containers.
-Place the alignment plate on top of the body plate. (The body plate is the spring loaded plate)
-Pour the 100 body portions of the capsule into the alignment plate.
-Carefully shake the plate to place the capsule bodies into place. (Place your hand over the side opening to prevents spills)
-Remove the alignment plate and add any loose bodies into any open holes and flip any bodies that are upside down. You can remove the alignment plate and press on the bottom tray to reveal any that are upside down.
***You want the bodies to be in the tray holes with the opening facing up***
-With the alignment plate removed, place the spill guard on top of the body plate.
-Fill each body with butter/oil to the top using pipette.
-remove the spill guard and place the alignment plate on top of the cap tray.
-Pour the caps into the alignment tray and shake it gently to add all the caps to the holes.
-Remove the alignment tray to add any caps and to flip any caps that are upside down.
***Use your pipette to pop out the upside down caps as this tray is not spring loaded***
***Caps should be in the holes with the opening facing up***
-Place the merge plate on top of the cap tray with the side notches facing up.
-Carefully pick up both trays and flip them upside down so that the merge plate is under the cap tray.
-Place both trays on top of the body plate.
-Using firm pressure, press down on the top plate. You will feel the bodies and the caps clicking together. Firmly press everywhere on the top plate to make sure all the capsules are connected.
-Remove the cap tray.
-Pick up the merge plate. This should house all of your connected capsules.
-Pour capsules into a tray or plate.
Capsules are now ready to be stored in a container of your choice. Store in the fridge.

Leave a comment

Please note, comments must be approved before they are published

Award Winning
Lab Tested and Certified
99.5% Positive Feedback
Tracked Shipping